PEDDERS CAMBER & CASTER KIT FOR LANDCRUISERS AND PATROLS
24 December 2005
These four eccentric kits allow a combination of camber and caster change on late model live axle Toyota’s and Nissan’s by replacing the standard swivel hub bearings with an offset unit.
PEDDERS RELEASE ENHANCED HEAVY DUTY RUBBER P5802 CASTOR BUSH FOR PATROLS AND LANDCRUISERS
24 December 2005
The Pedders 5802 rubber bush is a better alternative to urethane.
Suited to Nissan Patrol & Toyota Landcruisers the 5802 provides improved castor setting whilst limiting the amount of dirt ingression into the bush during high articulation off road driving - A common problem with urethane bushes
in these applications.
PEDDERS RELEASE HOLDEN 1 TONNER AND CREWMAN HEAVY DUTY LEAF PACKS
21 December 2005
GENERAL INFO
● Heavy-Duty Multi-Leaf Design
● Takes standard Holden Spring Eye Bush
● The low and standard height leaf springs are a 2 stage pack that provide a comfortable ride whilst assisting the load carrying abilities of the vehicle.
Super low is single stage with reverse eyes.
PEDDERS AU - BA H/DUTY FALCON FRONT LOWER INNER BUSH
18 December 2005
The 5857 Falcon bushes are a super duty rubber bush featuring a specially designed inner sleeve which is in the shape of a reverse hour glass. This provides extremely good load handling characteristics under compression thus retaining wheel alignment settings.
NEW PEDDERS HEAVY DUTY REAR COILS FOR THE MITSUBISHI 380
15 December 2005
The Mitsubishi 380 has recently been launched in Australia and Pedders are proud to announce the availability of heavy duty standard height coils. These coils are specifically designed for towing applications.
With a tow bar fitted along with a caravan/boat or trailer the rear of vehicle will squat noticeably. The 7937 Coil Springs are specifically designed to enhance the vehicles load carrying characteristics. They are also particularly suitable for reps who are often carrying loads by trailer or in the boot of the vehicle.
For further information please contact your local Pedders expert or check
PEDDERS RELEASE NEW HEAVY DUTY COMMODORE STRUT MOUNT FOR VR-ON
13 December 2005
Pedders now have in stock a revised designed heavy duty strut mount to suit the VR-on model Holden Commodores. These models
suffer from problems such as:
Knocking noises due to bond breakage in the strut mount.
Collapsed Strut mount causing reduced ride height and noise
To solve these problems Pedders now have in stock the redesigned 5851 which is a heavy duty version that withstands the loads
applied in everyday driving.
